Home  >  Products > cast iron plates/table > Cast iron T slot plate
  • Surface Plate with Groove
  • Surface Plate with Groove
  • Surface Plate with Groove
    Surface Plate with GrooveSurface Plate with Groove

    Surface Plate with Groove


    Cast Iron floor Plate that is suitable for use in the manufacturing processes of various industries. These plates act as a reference base for various purposes such as inspection, marking and layout. Made from qualitative range of raw material, this range is highly demanded across the market.

    Materials and Processing:


    (1) The material of our surface plate/table is cast iron HT200-350


    (2) Working surface hardness is HB170-240


    (3) Low inaccuracy error and good in grinding resistance. 


    Precision: According to the national standards measurement examination regulations execution,

    respectively is 0,1,2,3, fine polish.

    Size (in mm)
    1000x15002000 x 17503000 x 3000
    2000 x 15002500 x 20003500 x 2500
    2000 x 20002500 x 25004000 x 1000
    2400 x 12003000 x 10004000 x 2000
    2500 x 10003000 x 12505000 x 1000
    2500 x 12503000 x 15005000 x 2000
    2500 x 15003000 x 16006000 x 1000
    2500 x 16003000 x 20006000 x 2000

    Installation and adjustment

    When used surface plate ,you should first installation debugging,then you can use it . No significance work on surface plate if they aren't properly positioned .Surface plate should setup on level off, firm without shock place .please first put the pad iron down ,then put the surface plate on the pad iron ,removal the wooden case and oil . Measurement with the levelness of the surface plate ,when the surface plate isn't level ,please adjust the pad iron .( In the process of adjusting attention to safety)


    Nocie for use

    1: To the best uniform use of the flat plate throughout, to avoid local grinding concave.
    2: Keep the plate clean,  prevent be wroned by iron scrap, sand ...
    3: Put down workpieces on the plate gently, prevent the flat surface be impacted, once the plate surface hit the workpiece or other objects,repair impact and the convex part immediately.
    4: Do not do any hammer work on the surface plate .
    5: After use, should be clean it. If long time no use should not be coated with anti rust oil to prevent corrosion.

    Related Products
    Contact Us

    Sales dept:

    Tel:+86 180 3272 6169

    E-mail: ada@willingmachine.com

    Copyright © Willing Measuring Tools Co. Ltd All Rights Reserved Sitemap | Powered by